AOM-Asturo K20 AAA Pump and Gun Wall Mount Set-up Air-assist-airless system for fine finishes on wood, plastic and metal with over 60% transfer efficiency. Hard chrome over stainless fluid section with 20:1 ratio for medium and high solids coatings without having to reduce 20%-30% as you would with a 10:1 ratio pump. Maximum fluid pressure 2000 psi, with 1/2 GPM capacity for quick coating changes. The K20 system requires less than the 5cfm for proper atomization. Includes 5 gallon pick-up hose with screen, dual regulators, 25' set of hose, K1-mix gun with filter and tip. Optional reversible tip is available for an additional $85.45. This pump set-up does not qualify for free freight.
Our Price $1912.50
AOM-Asturo K20 AAA Pump and Gun Cart Mount Set-up Same as above but with a robust cart not a "pump on a stick". This pump set-up does not qualify for free freight.
Our Price $1997.50
AOM - ASTURO K1 Mix spray gun with cap, 100 mesh filter & tip (specify tip size with order) Standard tip set-up M1150 (.011, 50°). An Air-Assisted Airless Gun (Mix) for production painting which produces great film build with almost no overspray, uses a pin-type tip. Applies coatings twice as fast as HVLP and conventional spray guns. Available in many size tips with over 70% transfer efficiency. Produces a Class A finish and very popular for wood finishing. Used with a paint pump with a minimum of 10:1 ratio. Maximum spray pressure of 1800 psi. If you need a tip other than the 3 popular sizes shown, please refer to this chart on pin-type tips. Our most popular tip for wood finishes are .011 or .013 in 40° to 70° spray angles.
K1 Mix Gun with Standard Tip .011, 50°.
Our Price $531.05
Pump Protector Lube Concentrated fluid to lube wet pump component to protect from rust & corrosion during storage. After using waterbase coatings, ratio 2 oz. per gallon or water. 8 ounce bottle.
